Scientometrics - In recent year, a growing attention is dedicated to the assessment of research’s social impact. While prior research has often dealt with results of research, the last decade... 相似文献
The recovery of high valuable compounds from food waste is becoming a tighten issue in food processing. The large amount of non-edible residues produced by food industries causes pollution, difficulties in the management, and economic loss. The waste produced during the transformation of fruits includes a huge amount of materials such as peels, seeds, and bagasse, whose disposal usually represents a problem. Research over the past 20 years revealed that many food wastes could serve as a source of potentially valuable bioactive compounds, such as antioxidants and vitamins with increasing scientific interest thanks to their beneficial effects on human health. The challenge for the recovery of these compounds is to find the most appropriate and environment friendly extraction technique able to achieve the maximum extraction yield without compromising the stability of the extracted products. Based on this scenario, the aim of the current review is twofold. The first is to give a brief overview of the most important bioactive compounds occurring in fruit wastes. The second is to describe the pro and cons of the most up-to-dated innovative and environment friendly extraction technologies that can be an alternative to the classical solvent extraction procedures for the recovery of valuable compounds from fruit processing. Furthermore, a final section will take into account published findings on the combination of some of these technologies to increase the extracts yields of bioactives. 相似文献
Lithium salts are very important in the production of lithium batteries since they are used as precursors for the fabrication of cathode materials that require very low level of impurities (battery grade). Usually, the lithium extraction process from brine first yields lithium carbonate, which is then used as raw material for the production of other lithium compounds. However, it implies an increase in investment costs, considering more equipment and process stages. To remove the impurities and produce battery‐grade lithium compounds directly from brines, a laboratory‐scale process was developed using the methods of ion exchange and chemical precipitation. Thus, impurity‐free brine ready to be used in an industrial membrane electrolysis process is obtained. Different sequences and operating conditions were investigated for the purification of lithium‐concentrated brines, removing the main impurities of the natural brines: calcium, magnesium, and sulfate. For the characterization of solutions, crystals, and ion‐exchange resins, atomic absorption spectrophotometry, scanning electron microscopy, and X‐ray scattering spectroscopy were used. The results indicate that during the chemical precipitation process, lithium‐concentrated brine reacted with some additives (precipitating agents) at different stages in the batch reactors. Subsequently, the pulp obtained was sedimented and filtered, eliminating or reducing the impurities of the lithium brine. Thus, the most efficient precipitation sequence was evaluated as a function of the removal percentage of the species. The removal efficiencies obtained for Ca+2, Mg+2, and SO4?2 were of 98.93%, 99.93%, and 97.14%, respectively. Thereafter, the use of the ion‐exchange resins reduced the concentration of Ca+2 and Mg+2 to the values below 1 ppm. The combined use of both processes provided promising results that could be applied in the industry. 相似文献
Mechanically exfoliated 2D hexagonal boron nitride (h-BN) is currently the preferred dielectric material to interact with graphene and 2D transition metal dichalcogenides in nanoelectronic devices, as they form a clean van der Waals interface. However, h-BN has a low dielectric constant (≈3.9), which in ultrascaled devices results in high leakage current and premature dielectric breakdown. Furthermore, the synthesis of h-BN using scalable methods, such as chemical vapor deposition, requires very high temperatures (>900 °C) , and the resulting h-BN stacks contain abundant few-atoms-wide amorphous regions that decrease its homogeneity and dielectric strength. Here it is shown that ultrathin calcium fluoride (CaF2) ionic crystals could be an excellent solution to mitigate these problems. By applying >3000 ramped voltage stresses and several current maps at different locations of the samples via conductive atomic force microscopy, it is statistically demonstrated that ultrathin CaF2 shows much better dielectric performance (i.e., homogeneity, leakage current, and dielectric strength) than SiO2, TiO2, and h-BN. The main reason behind this behavior is that the cubic crystalline structure of CaF2 is continuous and free of defects over large regions, which prevents the formation of electrically weak spots. 相似文献
The continuous miniaturization of field effect transistors (FETs) dictated by Moore's law has enabled continuous enhancement of their performance during the last four decades, allowing the fabrication of more powerful electronic products (e.g., computers and phones). However, as the size of FETs currently approaches interatomic distances, a general performance stagnation is expected, and new strategies to continue the performance enhancement trend are being thoroughly investigated. Among them, the use of 2D semiconducting materials as channels in FETs has raised a lot of interest in both academia and industry. However, after 15 years of intense research on 2D materials, there remain important limitations preventing their integration in solid‐state microelectronic devices. In this work, the main methods developed to fabricate FETs with 2D semiconducting channels are presented, and their scalability and compatibility with the requirements imposed by the semiconductor industry are discussed. The key factors that determine the performance of FETs with 2D semiconducting channels are carefully analyzed, and some recommendations to engineer them are proposed. This report presents a pathway for the integration of 2D semiconducting materials in FETs, and therefore, it may become a useful guide for materials scientists and engineers working in this field. 相似文献
This work shows the preparation of ethylene vinyl acetate copolymer/banana starch/Cloisite 20A organoclay (EVA/starch/C20A) nanocomposites by melt processing. Wide angle X-ray diffraction (WAXD), field emission scanning electron microscopy (FE-SEM), differential scanning calorimetry and thermogravimetric analysis were used to characterize the obtained nanocomposites. Mechanical properties were also determined. In addition, the performance of the nanocomposite films under composting was preliminarily studied; it was conducted using the soil burial test method. Despite knowing that the starch is difficult to process by extrusion, nanocomposite films with high homogeneity were obtained. In this case, C20A organoclay acts as an effective surfactant to make the starch natural polymer compatible with the EVA synthetic polymer. The good compatibility between EVA, starch and C20A clay was also deduced by the formation of intercalated and intercalated-exfoliated structures determined by WAXD and FE-SEM. Physical evidence of the damage in EVA/starch/C20A nanocomposite films after the composting test was observed. It is worth noting that despite the absence of starch, the EVA/C20A nanocomposite film, used as a control, also showed surface damage. This behavior is related to the organic modifier linked to clay C20A, which contains molecules derived from fatty acids that can be used as a food source for microorganisms.
Changing behaviours and attitudes towards more sustainable individual energy consumption is a difficult topic to address. After identifying the most recurrent factors influencing the bad energy consumption, society's environmental short-sightedness, a lack of individual responsibility and a tendency to put responsibility upon firms, institutions, and governments, the authors evaluated the effect that business practices can have on individual behaviour. By qualifying as highly credible sources of information, positioning themselves as examples to follow, and providing its employees with the necessary smart and innovative technology, business communities can have a major impact on changing individual behaviours towards more sustainable energy consumption. 相似文献